whitepaper
Application Note: Microbiological considerations in cleanroom validation
Contamination, microbiological or otherwise, is a key safety concern in the development and manufacture of all pharmaceuticals and medical devices.
List view / Grid view
Cleanrooms
product
One stop to meet contamination monitoring regulations
Presenting solutions that Particle Measuring Systems provide in total concept including training, services and their FMS system which monitors instruments.
news
Wickham Laboratories Ltd to exhibit at Pharmig 2018
Wickham Laboratories will be exhibiting at Pharmig’s 26th annual conference held on the 28 and 29 November at the Belfry Hotel, Nottingham...
article
Wickham Laboratories: Drawing on deep technical expertise
Wickham Laboratories draws on deep technical expertise, backed by decades of global experience, when identifying challenges and providing solutions for a broad range of products and testing scenarios.
article
Perceptive Engineering: Spotlight on… Continuous Manufacturing
In this Spotlight on Continuous Manufacturing, Perceptive Engineering creates industrially robust solutions using advanced model-based control and monitoring technologies...
article
G-CON: Spotlight on… Continuous Manufacturing
In this Spotlight on Continuous Manufacturing, G-Con explains how they have simplified the entire design/build/validate process via their prefabricated cleanroom infrastructure line...
news
CPD-certified conference programme for Lab Innovations 2018
Two days of free science focused presentations...
article
How the new draft of Annex 1, Manufacture of Sterile Medicinal Products impacts environmental monitoring programmes
This article explores how the new draft of Annex 1, Manufacture of Sterile Medicinal Products impacts environmental monitoring programmes.
news
NewAge® Industries/AdvantaPure® completes plant expansion for additional clean room manufacturing suites
Following nearly two years of planning, preparation, construction and validation, team members at NewAge Industries/AdvantaPure are now using new clean rooms to produce platinum-cured silicone tubing, molded components and Single-Use molded tubing assemblies...
news
AdvantaPure® introduces new case studies on tubing, closures and molded assemblies
AdvantaPure has released three new case studies focused on fluid transfer challenges involving biopharm and pharmaceutical applications. Each Study Describes Processing Problems, Customer Goals, and Product Solutions...
whitepaper
Scientific Poster: From Screening to Small Scale GMP Biomanufacturing: Exploring a simple, unified platform strategy for handling a range of cell culture needs
This poster discusses a process for a 12-week clone development process. The process starts in silico, and progresses through screening and clone selection in 96-deepwell plates up to five liter shaker flasks...
news
Agilent at ASMS 2018
The 66th American Society for Mass Spectrometry (ASMS) Conference was held 03 - 07 June in San Diego, California.
news
Winners of the Cleanroom Technology 2018 Awards announced
The winners of the Cleanroom Technology Awards 2018 have been announced. The awards have been introduced to recognise and reward achievements, celebrating the best product innovations from those exhibiting at the Cleanroom Technology Conference 2018 (16-17 May)...
news
Wickham Laboratories to present at Cleanroom Technology Conference 2018
Wickham Laboratories CEO, Dr John McKenzie, will be presenting at the Cleanroom Technology Conference on the 16 May at 2:30PM, at the National Conference Centre in Birmingham...
whitepaper
Whitepaper: Applying single-use efficiencies to room-to-room fluid transfer
This white paper explains how a wall pass-through system that incorporates single-use processes can reduce contamination risks and the use of valuable natural resources and waste disposal while increasing productivity and efficiency...
