FPS will show the integrated solutions for jet mill, loop mill and mechanical mill: the multimilling platform

At Interphex (21-23 March in New York, USA), FPS will show his last innovations in micronization and milling technologies, for pharmaceutical, cosmetic and chemical applications.

An innovative interchangeable milling station is presented for the execution of milling operations in research and pilot plants departments, with different technologies integrated on a single system.

The platform considers:

• spiral jet mill type PilotMill-5 or PilotMill-6
• pin mill 100mm
• loop mill type QMill-6
• cone mill

A minimum footprint is given for use in existing rooms.

The milling system can be operated in conjunction with a cryogenic exchanger which allows the reduction of process temperature down to -100°C.

The system can be designed for installation in electric rated areas and with processing of OEB5/6 products if combined with FPS barrier isolator system.

Milling operations may result in dust clouds, exposing operators and environment to HPAPI, due to high energy involved in the process and size reduction down to few μm. The multimilling station in isolator guarantees levels of containment down to 40ng/m3 while operating with interchangeable pilot size mills (spiral jet mills,mechanical mills…).

Visit FPS at Booth 2622.

F.P.S. Food and Pharma systems srl
Via Vandelli, 20
22100 Como – Italy
[email protected]
www.foodpharmasystems.com